Pathping

Running a Pathping

1. Click Start.
2. In the search field, type cmd.
3. Right-click on CMD.exe and select Run as Administrator.
4. Enter the command pathping xxx.xxx.xxx.xxx > c:\pathping.txt and press Enter.
   Note: Replace the Xs with the appropriate IP address from the list below. Run this command once per IP address for your region.
5. Allow several minutes for the test to complete. When you see a new line of text in the command prompt, the pathping is done. This creates a file on your C: drive called pathping.txt.
   Note: If you receive an error, you did not run the command prompt in Administrator Mode. Go back to step three and try again.
6. Close the command window.

This will produce a text file you can attack and send to Kixeye support.

Example 
pathping wc-fb-vip.sjc.kixeye.com